Koch-Chemie High Gloss Polishing Kit

Koch-Chemie high gloss polishing kit: special polishing compound with sealant effect (1 l), matching pad (126 mm), spray sealant and soft sponge.

One Cut & Finish P6.01

Innovative machine polish for quickly producing high-gloss surfaces and for effectively removing scratches and grindings from a grit size of P2000 and above with a simultaneous sealing effect.
Cut: 6,0
Gloss: 8,0

Areas of use
Paints on cars, commercial vehicles, motorcycles, etc.

Recommendations for use
Apply using a high-performance orbital polisher and a One Step Pad in a crosswise direction. Apply the high-gloss polish at a medium speed with medium pressure.

Warnings
Safety data sheet available on request for trade users. Shake before using. Protect against frost and excessive heat. Do not use on hot surfaces. Before using, check suitability and compatibility.

One Cut Pad, 126 mm

Medium abrasive sponge for removing moderate weathering and scratches using the One Cut and Finish P6.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contributes to a high level of abrasiveness and excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety.
Compression hardness: 12. Abrasiveness: 5.

Spray Sealant

Efficient sealing spray for a quick and easy achievement of a high-gloss surface. Gives the paint a velvety surface and a clearly visible colour deepening. The sealing components create a perfect water beading effect.

Areas of use
Painted surfaces on cars, commercial vehicles, motorcycles etc.

Recommendations for use
Spray one to two sprays onto cleaned and dry paint surface. Do this component by component and divide large surfaces such as the bonnet and roof. After a brief evaporation time, polish off all residues with a clean microfiber cloth. Do not allow to dry. The treated vehicle must not be washed with chemicals on the same day.

Warnings
Shake before using. Before using, check suitability and compatibility. Protect against frost and excessive heat. Safety data sheet available on request for trade users.

Sponge, soft, black

Handy soft sponge for applying plastic, rubber and leather care products, etc., and for manual finishing of a paintwork seal.

Notice
This product information can advise you only without obligation. Liability on our part can not be derived.
Please check whether the product is suitable for your application. We will be pleased to assist you.