Koch-Chemie Paint Protection Kit Nano

Koch-Chemie paintwork protection kit: silicone oil-free lubricant clay spray, mild cleaning clay bar and advanced paintwork sealant 1K-Nano.

Clay Spray

Mild, low-residue lubricant free of coating defects. Effective for use with clay bars or pads. The excellent lubricity minimises surface scratching during cleaning. Unlike other lubricants, it does not leave behind any film. Residue is easy to wipe away with a microfibre cloth. Due to the specialised formula, the clay bars or pads do not dissolve and last considerably longer.

Areas of use
Smooth surfaces such as varnish, glass etc.

Recommendations for use
Spray undiluted over the entire area and work the moist surface with a clay bar or pad. Wipe off any residue with a microfibre cloth.

Warnings
Before using, check suitability and compatibility.

Reinigungsknete blau. Clay

Removes even stubborn deposits such as tree resin and insects, rust bloom, industrial dust, spray mist, tar, limescale stains, etc. gently from smooth surfaces such as paintwork and glass, without affecting or damaging them. Optimal for intensive cleaning before the polishing process or before fitting new windscreen wipers.

Areas of use
For all smooth surfaces such as paintwork, glass, etc.

Recommendations for use
1. Clean/wash surfaces thoroughly beforehand with necessary products
2. Shape the cleaning clay into a palm-sized piece
3. Spray Clay Spray onto the surface
4. Move the cleaning clay over the surface without pressure until it is smooth and clean
5. Knead the dirt on the cleaning clay to the inside until the surface is clean again
6. Cleaning clay can be used until it is almost saturated with dirt particles
7. To prevent drying out, moisten the cleaning clay after use and store in the box

1K-Nano. Paintwork sealant

The 1K-Nano is bonded to the paint and based on innovative reactive substances forms extremely smooth, mirror paint seal that is resistant to chemicals, UV radiation and abrasion. Special additives give the paintwork an extremely deep sheen. The one-step the process reduces the working time considerably in comparison with 2-component systems.
The paintwork is protected perfectly and lastingly from adverse environmental factors. A unique easy to clean performance means that insects, bird droppings and other deposit build-ups can be removed much more easily. The durability is approx. 1 year, but this can be extended up to 3 years through regular manual after-care with NanoMagicShampoo (hand wash) or through after-care with NanoMagic Twin Wax (carwash) and the recommended annual paintwork inspection by an expert!
Cut: 0
Gloss: 9,9

The set contains:
- 250 ml sealant in an aluminium bottle
- 75 ml dispensing bottle - sufficient for approx. one car
- sponge
- 5 certificates
- 5 flyers
- 5 stickers "Paint sealed with Koch-Chemie 1K-Nano"

Areas of use
Completely hardened paint on cars, commercial vehicles, motorbikes, etc.

Recommendations for use
A. Basic cleaning Before the polishing and sealing process pre-clean/wash the vehicles thoroughly with an alkaline product (eg with Green Star, do not use sealing shampoos). In the case of coarse pollutants such as tree sap, rust bloom, tar, etc., pre-treat with cleaning clay, Teerwäsche or similar.

B. Preparing the paintwork
1. Heavy to medium-heavy weathering: Depending on the condition, treat the paintwork mechanically with Heavy Cut (312001) polishing compound polish and/or Feinschleifpaste (181001). Remove residues completely with Profi microfibre cloth* (999241).
2. Slightly weathered paintwork and paintwork treated in accordance with 1. (hologram removal): Apply Hochglanz-Antihologramm-Politur (182001) mechanically using an eccentric random orbit sander (eg Makita BO6040) and an orange anti-hologram pad (999256). Remove residues completely with Profi microfibre cloth.
3. New paintwork (without holograms and scratches) and paintwork treated in accordance with 2.: From here wear suitable gloves. Wipe all surfaces gently with a clean Profi microfibre cloth* (999241)
soaked in Silicon- & Wachsentferner (207005) and directly before the surface dries wipe again with a second, new Profi microfibre cloth* in your other hand. Only in this way can surfactants, drying aids, the oil contained in polishes, etc., be removed completely and crosslinking problems of the 1K-Nano be avoided.
Attention: with sensitive uni or one-layer lacquers Silicon- & Wachsentferner should be diluted 1:4 with water, to avoid possible matting. Repolish the last streaks gently with another clean Profi microfibre cloth*. The
paint should now have a surface free of scratches and holograms in sunlight or in a paintwork check with a sodium vapour lamp. After this step, do not touch the paintwork again with the palms or fingers (danger of interlinking faults, wear gloves). The surface is now perfectly prepared for 1K-Nano sealing.

C. Paintwork sealing
1. For working with 1K-Nano observe the recommended ambient temperature of 15-30°C. It is essential for working and setting to take place inside and not in the open.
2. Shake the aluminium bottle thoroughly shortly before use and fill the supplied plastic bottle (75ml). This amount is usually sufficient for a medium-sized vehicle. If not enough 1K-Nano is applied the sealing
quality will suffer. Apply sealant only to fully set (see information below) painted surfaces.
3. Apply 1K-Nano ideally mechanically (mechanical application is urgently recommended in particular with single-layer and dark uni lacquers!) by means of an orbital sander without forced orbit at low speed and with a black finishing pad (999292), alternatively manually with a white pad (999038) without pressure in sections (max. 1 component: bonnet, door, wing, etc.). Buff for approx. 2-3 minutes, always applying a fresh sealant. In the polishing process make several closely overlapping tracks in order to guarantee saturation interlinking and to avoid clouding (uneven colour intensification). After these 2-3 minutes do not apply any more fresh sealant and continue to polish until a continuous film without drop formation (runs) is created. 3. Wait for a further 2-3 minutes and then polish the now completely dry film by hand with a clean Profi microfibre cloth* to a high gloss.
4. After approx. 1-2 hours reaction time the sealant has hardened so that there is now a long-term seal that is resistant to chemicals and wears. Any streaks that occur (excess product) are caused by the reaction process and can be removed after the hardening period with a Profi microfibre cloth* or are eliminated the first time the vehicle is washed (at the earliest after 3 days).

Information
Attention: do not use on fresh repair paints! Repainted surfaces require a hardening period of approx. 6-8 weeks before the sealant can be applied. OEM paints with new vehicles can be sealed directly. During work, make sure there are sufficient ventilation and fresh air! Because of the reactive components, 1K-Nano is kept in a tightly sealed aluminium bottle. Pour any leftover product back into the aluminium bottle after work,
recap the bottle immediately and store it upright at all times. After opening, the shelf life is approx. 1 year.

*When working with 1K-Nano use only the ultrasonically cut Profi microfibre cloth (999241), because poorer quality cloths contain finishes such as fabric softeners, silicone derivatives, etc., and thus prevent interlinking on the paint. Always use several clean cloths to prevent residues being carried over and thus undesirable interlinking faults.

Information
Attention: do not use on fresh repair paints! Repainted surfaces require a hardening period of approx. 6-8 weeks before the sealant can be applied. OEM paints with new vehicles can be sealed directly. During work,
make sure there are sufficient ventilation and fresh air! Because of the reactive components, 1K-Nano is kept in a tightly sealed aluminium bottle. Pour any leftover product back into the aluminium bottle after work, recap the bottle immediately and store it upright at all times. After opening, the shelf life is approx. 1 year.

*When working with 1K-Nano use only the ultrasonically cut Profi microfibre cloth (999241), because poorer quality cloths contain finishes such as fabric softeners, silicone derivatives, etc., and thus prevent interlinking
on the paint. Always use several clean cloths to prevent residues being carried over and thus undesirable interlinking faults.

Warnings
Before using, check suitability and compatibility.

Notice
This product kit information can advise you only without obligation. Liability on our part can not be derived.
Please check whether the product is suitable for your application. We will be pleased to assist you.