Koch-Chemie H7.01 Paste — Silicone-Free Heavily Abrasive Polish

Additional information

Areas of use

Gelcoat.

Recommendations for use

Apply Schleifpaste to the polishing pad (hard white polishing pad or medium-hard yellow polishing pad) and polish the precleaned surface crosswise with max. 2.000 rpm. The cleaning effect can be varied with pressure, polishing pad and speed. At the start of the polishing process, we recommend applying greater pressure at a lower speed. Then gradually reduce the pressure and finish off at a higher speed. Polish residues can be removed easily with our ultrasound-cut Profi microfibre cloth. Streaks or traces of polish are removed with our Hochglanz-Antihologramm-Politur.

Safety Data Sheets

Click here to learn more about product information, operating instructions and safety data sheets.

Warnings

Not suitable for scratch-resistant paint. Shake before using. Protect against frost and excessive heat. Before using, check suitability and compatibility. Do not use it on hot surfaces.

Notice

This product information can advise you only without obligation. Liability on our part can not be derived. Please, check whether the product is suitable for your application. We will be pleased to assist you.