One Cut & Finish Polishing Compound

With our two-step PolishSystem, we have taken paint treatment to the next level. To increase the degree of cut in all polishes while maintaining the same high level of gloss, the polishes have been adapted to the newly developed, more scratch-resistant paint systems. To achieve the best possible result in only two steps, our polishes are matched to our specially developed pads.

Turn two into one

For a more efficient approach to vehicle preparation, we have now developed an efficient one-step PolishSystem to complement our two-step PolishSystem. With our innovative One Cut & Finish P6.01 machine polish, we deliver a product that combines the optimum ratio of cut and gloss.

In line with our product system, the orange One Cut Pad with its reticulation and the cell count is optimally matched to the One Cut & Finish P6.01. As usual, the pad is available in the usual three sizes (Ø 76 mm / 3″, Ø 126 mm / 5″, Ø 150 mm / 6″). The polishing compound and a pad complement each other creating a high-gloss surface. In just one step, scratches and sanding traces from P2000 grit upwards are effectively removed and the surface is sealed by the Carnauba waxes contained in the polish.

Maximum results with minimum time and effort are guaranteed.