Koch-Chemie 1K-Nano — Paintwork Sealant

Additional information

Weight	0.45 kg
Volume	250 ml
Best for	Cars, RVs
Suitable for	Professionals, Enthusiasts

The set contains

– 250 ml sealant in an aluminium bottle
– 75 ml dispensing bottle – sufficient for approx. one car
– sponge
– 5 certificates
– 5 flyers
– 5 stickers “Paint sealed with Koch-Chemie 1K-Nano”

Areas of use

Completely hardened paint on cars, commercial vehicles, motorbikes, etc.

Recommendations for use

A. Basic cleaning Before the polishing and sealing process, pre-clean/wash the vehicles thoroughly with an alkaline product (e.g. with Green Star, do not use sealing shampoos). In the case of coarse pollutants such as tree sap, rust bloom, tar, etc., pre-treat with cleaning clay, Tea or similar.

B. Preparing the paintwork
1. Heavy to medium-heavy weathering: Depending on the condition, treat the paintwork mechanically with Heavy Cut (312001) polishing compound polish and Feinschleifpaste (181001). Delete residues with Profi microfibre cloth* (999241).
2. Slightly weathered paintwork and paintwork treated following 1. (hologram removal): Apply Hochglanz-Antihologramm-Politur (182001) mechanically using an eccentric random orbit sander (e.g. Makita BO6040) and an orange anti-hologram pad (999256). Delete residues with Profi microfibre cloth.
3. New paintwork (without holograms and scratches) and paintwork treated following 2.: From here, wear suitable gloves. Wipe all surfaces gently with a clean Profi microfibre cloth* (999241) soaked in Sil (207005), and directly before the surface dries, wipe again with a second, new Profi microfibre cloth* in your other hand. This way, surfactants, drying aids, the oil contained in polishes, etc., be deleted, and crosslinking problems of the 1K-Nano be avoided.
Attention: with sensitive uni or one-layer lacquers, Sil should be diluted 1:4 with water to avoid possible matting. Repolish the last streaks gently with another clean Profi microfibre cloth*. The paint should now have a surface free of scratches and holograms in sunlight or a paintwork check with a sodium vapour lamp. After this step, do not touch the paintwork again with the palms or fingers (danger of interlinking faults, wear gloves). The surface is now perfectly prepared for 1K-Nano sealing.

C. Paintwork sealing
1. For working with 1K-Nano, observe the recommended ambient temperature of 15-30°C. It is essential for working and setting to take place inside and not in the open.
2. Shake the aluminium bottle thoroughly before use and fill the supplied plastic bottle (75ml). This amount is usually sufficient for a medium-sized vehicle. If not enough 1K-Nano is applied, the sealing quality will suffer. Apply sealant only to set (see information below) painted surfaces fully.
3. Apply 1K-Nano ideally mechanically (mechanical application is urgently recommended in particular with single-layer and dark uni lacquers!) using an orbital sander without forced orbit at low speed and with a black finishing pad (999292), alternatively manually with a white pad (999038) without pressure in sections (max. 1 component: bonnet, door, wing, etc.). Buff approx. for 2-3 minutes, always apply a fresh sealant. In the polishing process, make several closely overlapping tracks to guarantee saturation interlinking and avoid clouding (uneven colour intensification). After these 2-3 minutes, do not apply any more fresh sealant and continue to polish until a continuous film without drop formation (runs) is created. 3. Wait 2-3 minutes, then polish the now completely dry film by hand with a clean Profi microfibre cloth* to a high gloss.
4. After approx. 1-2 hours reaction time, the sealant has hardened so that there is now a long-term seal resistant to chemicals and wear. Any streaks (excess product) are caused by the reaction process and can be removed after the hardening period with a Profi microfibre cloth* or are eliminated the first time the vehicle is washed (at the earliest after three days).

Information
Attention: do not use fresh repair paints! Repainted surfaces require a hardening period of approx. 6-8 weeks before the sealant can be applied. OEM paints with new vehicles can be sealed directly. During work, make sure there are sufficient ventilation and fresh air! Because of the reactive components, 1K-Nano is kept in a tightly sealed aluminium bottle. Pour any leftover product back into the aluminium bottle after work, recap the bottle immediately and store it upright at all times. After opening, the shelf life is approx—one year.

*When working with 1K-Nano, use only the ultrasonically cut Profi microfibre cloth (999241) because poorer quality cloths contain finishes such as fabric softeners, silicone derivatives, etc., thus preventing interlinking on the paint. Always use several clean materials to prevent residues from being carried over and undesirable interlinking faults.

Information
Attention: do not use fresh repair paints! Repainted surfaces require a hardening period of approx. 6-8 weeks before the sealant can be applied. OEM paints with new vehicles can be sealed directly. During work, make sure there are sufficient ventilation and fresh air! Because of the reactive components, 1K-Nano is kept in a tightly sealed aluminium bottle. Pour any leftover product back into the aluminium bottle after work, recap the bottle immediately and store it upright at all times. After opening, the shelf life is approx—one year.

*When working with 1K-Nano, use only the ultrasonically cut Profi microfibre cloth (999241) because poorer quality cloths contain finishes such as fabric softeners, silicone derivatives, etc., and thus prevent interlinking on the paint. Always use several clean materials to prevent residues from being carried over and undesirable interlinking faults.

Safety Data Sheets

Click here to learn more about product information, operating instructions and safety data sheets.

Warnings

Before using, check suitability and compatibility.

Notice

This product information can advise you only without obligation. Liability on our part can not be derived. Please, check whether the product is suitable for your application. We will be pleased to assist you.